The vibration testing machine is a simple electromagnetic vibration testing machine, which is suitable for full inspection of production lines and assembly lines. It can be used to run the vibration form test simulating highway transportation, or to screen and test the welding, packaging and fastening of samples.
The testing machine adopts electronic control and has the characteristics of adjustable vibration frequency and amplitude, large driving force, low noise, high load, high bandwidth and low fault. The controller of the testing machine adopts fully enclosed design, which is easy to operate and has high safety. The working base frame can be moved, easy to place and beautiful.
Technical parameters of vibration testing machine
| Model | DZD-450LFS | DZD-450HFS |
| Maximum test load | 80 Kg | 60 Kg |
| Amplitude | 0～5mm（No amplitude display） | 0～4mmAdjustable（No amplitude display） |
| Vibration direction | Unidirectional vertical (up and down) | Vertical and horizontal vibration. |
| Maximum acceleration | 0～20gAdjustable | 0～15gArbitrary adjustment。 |
| Frequency range | 1～600Hz(±0.1%) | |
| Sweep range | 1～600Hz:frequency / time / amplitude can be set arbitrarily | |
| Vibration waveform | Sine wave mode, half wave or full wave vibration mode can be selected | |
| Time control | In seconds, it can be set arbitrarily. | |
| Electromagnetic field radiation | Within 100 milligauss (1m) | |
Vibration table size (long × wide × High) | 500×500×6mm | |
Platform size (long × wide × High) | 500×500×200mm | 500×500×450mm |
| Driving machine power | 2.2kw | |
| Supply voltage | AC220V±10% 50/60HZ | |
| Fixed function | There are 24 10mm threaded holes on the table | |
| Standard accessories | 2 safety tubes 2 rubber belts Table body foot cup cover 4 Four expansion screws for fixing the table body 1 boat switch 4 rubber pads on the table | |
| Options | Digital display vibration measuring instrument, which can measure amplitude. | |
| Remarks | The frequency range is 1 ~ 600Hz, and any frequency within this frequency range shall not exceed one of the following two items, that is, the maximum acceleration is less than 15g and the maximum amplitude is 4mm. | |
| Main calculation formula | 1、1g=9.8m/s2 2、Acceleration (unit G) = 0.002 * F2 (frequency unit Hz) * D (amplitude unit mmp-p) | |
